Feeding Equipment

Feeding livestock is a demanding and time-consuming chore. Help ease your workload with quality feeding equipment. Schmidee’s Repair, Sales and Service has feed conveyors, belt feeders, feed carts, roller mills, self-feeders and bale feeders for feeding your livestock. 608-994-2820

Zabel Equipment

Zabel’s Equipment Material Handling Belt Conveyor
Zabel’s material handling conveyors are one of the most efficient pieces of equipment on the market with their rugged sides, welded pipe, and angle cross pieces. Requires less support than other models. Zabel Equipment belt conveyor Drive rollers are covered with a heavy rubber to prevent slipping of the belt. They come with optional power brush cleaner, belt scraper, hip-roof cover, 6 degree decline and much more.

  • Model 1625 – 16″ wide
  • Model 2400 – 24″ wide

Zabel’s Belt Feeders
Large capacity, heavy duty steel construction, easy maintenance with greasable bearings, sturdy belt tightener, double-dipped steel frames, completely shielded for your safety, and a wide variety of options and accessories to fit almost any set-up. Widths of 16″, 24″ or 36″.

  • Model ZCF1600 – 2 ‘, 4′ and 8′ sections can make up any length desired

Valmetal Manufacturing

Valmetal Belt Conveyors
Valmetal conveyors are reliable, dependable, and flexible. Reliability begins with the drive unit, industrial gear box designed to last longer with less maintenance. A tough polyester belt with PVC coating makes it flexible in below zero weather for all year use. Conveyors can run in either direction.

  • Model 6014 – max length 50′, width 14″ and up to 20 ft between supportsValmetal Belt Conveyor
  • Model 6018 – max length 40′, width 18″ and up to 20 ft between supports
  • Model 7014 – max length 120′, width 14″ and up to 20 ft between supports
  • Model 7018 – max length 100′, width 18″ and up to 20 ft between supports
  • Model 7024 – max length 70′, width 24″ and up to 20 ft between supports
  • Model 8014 – max length 260′, width 14″ and up to 20 ft between supports
  • Model 8018 – max length 200′, width 18″ and up to 20 ft between supports
  • Model 8024 – max length 120′, width 24″ and up to 20 ft between supports

 Valmetal Belt Feeder
Valmetal belt feeders require only one motor to drive the belt and plow. The plow drops the feed onto the conveyors that quickly moves in one direction. At each end of the feeder, the plow reverses automatically and smoothly with continuous loop cable drive. Several options come with this belt feeder like single, split, center-fill and multi-lot feeding. We can make it fit any feed handling you need.

Valmetal Belt FeederBelt Feeder

  • Model 7014 – section length are 18″ and 19″
  • Models 8014 & 8018 – section lengths are 24″ and 19″

Low profile model

  • Model 7014 – section lengths are 18″, 6”, 10”, and 19”
  • Models 8014 & 8018-section lengths are 24″, 7″, 10″, and 19″

 

Valmetal Chain ConveyorValmetal single chain
Valmetal belt-chain reduction drive system has a real pull even with hard and heavy loads. Conveyors are constructed of heavy gauge galvanized steel. They are available in 2’6″, 4′, 5′, 8′ and 10′ lengths.

 

Valmetal Feed Carts
Super Carts are equipped with Honda engines for easy start. Rear wheels are mounted directly to the hydraulic motors and are driven by powerful hydrostatic pump, eliminating roller chains and sprockets for maintenance purposes. Foot operated transmission are under the cart for easy curb and doorway driving. Angle iron paddles are used for allowing large volume of feed and can feed from both sides.Valmetal Super Cart 960

  • Model 525 – length 76″, width 30″ and height 60″
  • Model 530 – length 82″, width 33″ and height 60″
  • Model 542 – length 88″, width 37″ and height 64″
  • Model 960 – length 100″, width 45″ and height 64″
  • Model 975 – length 116″, width 45″ and height 64″

Motorized feed cart motors are disengaged for easy starting, each tire is made of 6 ply on all models.  Tub floors are bolted with auger u-through for easy maintenance. Direct traction by two hydraulic motors,  each has a large oil reservoir and hydraulic oil filter Valmetal Hydraucart motorized feed cartto prevent overheating. Heavy duty beaters are designed for long fibers.

  • Model 42 – length 82″, width 32″ and height 62″, capacity 42 pi cu
  • Model 52 – length 88″, width 36″ and height 64″, capacity 52 pi cu
  • Model 78 – length 100″, width 51″ and height 64″, capacity 78 pi cu

Valmetal grain roller mill
Harder steel rolls and optional discharges.

  • Model 2R12 w/hopper – 5hp
  • Model 2R12 w/proportioners – 5hp
  • Model 2R12 w/unloading auger – 5hp
  • Model 4R12 w/double hopper – 7.5hp
  • Model 4R12 w/proportioners – 5hp
  • Model 4R12 w/hopper w/reserve – 5hp
  • Model 4R12 w/double hopper and unloading auger – 7.5hp

Valmetal HammermillValmetal Hammermill
Hammermill can be mounted directly over mixer for vertical auger. To eliminate grain leakage, they have a spring loaded front plate.

  • Screen sizes: 1/4″, 5/16″, 3/8″,  1/2″
  • No belts, direct drive
  • C-face motor mount for 7.5 and 10hp motor

Livestock Feeders

Bergman Cattle feeders
Several different sizes to choose from

  • Model MF300 – length 22″, capacity 400lbsBergman 406 steer feeder
  • Model 306 – length 6′, one sided feeder .8 ton
  • Model 406 – length 6′, capacity 1.12 ton
  • Model 706 – length 6′, capacity 3.2 ton, 36 head
  • Model 708p – length 8′, capacity 4 ton, 48 head
  • Model 708 – length 8′, capacity 4.3 ton, 48 head
  • Model 710 – length 10′, capacity 5.4 ton, 60 head

Hanson Auger Bunk Feeder

  • Steel-Sided
  • Plank-Sided

Tube-Line Chainless Bale Feeder
Pick from one of these chainless bale feeders to make feeding easy

  • Model BF5000 SL – self-loading, pull behind
  • Model BF5000 3PH – 3 point hitch design
  • Model BF5000 S – stationary model