Grain Handling

Schmidee’s Repair has a full line of grain handling equipment. We have complete bin unloading systems, grain conveyors, augers, grain cleaners and grain vacs. 608-994-2820

Grain Bin Unloading Systems

Sudenga Round Tube Power Sweep Sudenga Round Tube Power Sweep

  • Oil bath drive
  • 8″ and 10″ systems
  • Dryer and concrete floor bins
  • 2400 to 5500 bushels per hour

 

Hutchinson Mass-ter Flow Commercial Unloading Systems
Hutchinson Mass-ter FlowThe most effective in higher capacity and with horizontal conveyors only. With roller chain and combined with high molecular weight polyethylene paddles makes for a long life and smooth operation.

Specifications:

Dimension of Conveying Chamber Conveyor Chain Paddles Capacity
9″ x 14 3/4″ Ca550
Ca557
D81x
3/8″ UHMW 3,300 to 10,000 BPH
13″ x 16 7/8″ CA557
D81x
D88C
3/8″ UHMW 7,500 to 15,000 BPH

 

 

 

 

 

Hutchinson U-Trough System
Tube and U-Trough Systems
The Tube and U-Trough systems are available in commercial applications for larger bins and flat storage structures. Even in smaller bins these will work well. Have the same high quality components.

Tube Type Specifications

Bin Unloader Diameter Galy Housing Gauge Flight Diameter Flight Strip Auger Shaft Capacity
8”  14ga  7” OD  3/16”  1.9”OD tube  2,000 BPH
10”  12ga  9” OD  3/16”  2” Pipe  3,000 to 4,0000 BPH
12”  12ga  11” OD  3/16”  2 ½” Pipe  5,000 to 6,500 BPH

 

 

 

 

 

 

U-Trough Specifications

Flight Diameter Trough Gauge Flight Strip Auger Shaft Capacity
9” 14ga 7ga or 3/8” 2″ 500 to 3,000 BHP
12″ 12ga ¼” or 3/8” 2″ 2,000 to 6,000 BHP
14″ 12ga ¼” 3″ 3,000 to 8,000 BHP
16″ 12ga 5/16” 3½” 4,000 to 10,000 BHP

 

Hutchinson Kleen Sweep
Hutchinson Kleen Sweep

  • Series BK08S – unload dia 6”, speed 258rpm, bin diameter 24’ to 75’
  • Series BK08S – unload dia 8”, speed 390rpm, bin diameter 24’ to 75’
  • Series BK10S – unload dia 8”, speed 300rpm, bin diameter 24’ to 92’
  • Series BK10S – unload dia 10”, speed 390rpm, bin diameter 24’ to 92’
  • Series BK12S – unload dia 10”, speed 240rpm, bin diameter 24’ to 120’
  • Series BK12S – unload dia 12”, speed 280rpm, bin diameter 24’ to 120’

 

Hutchinson Power Sweep
Hutchinson Power SweepThe power sweep offers the convenience of the bin sweep without the motor or wiring. The power sweep can adjust to the Tube, U-Though or Masse conveyors.

  • Series BK10P -  flight diameter 7” OD, speed 400rpm, bin diameter 24’ to 75’
  • Series BK12P – flight diameter 9” OD, speed 320rpm, bin diameter 24’ to 75’

 

Hutchinson Bin Unloading System

  • Commercial Double Drive Vertical – 8”, 10”, and 12” vertical stand 16’6” tall
  • Standard Vertical – 6”, 8” and 10”, made to directly discharge into trucks, trailers or mills
  • Horizontal – 6”, 8”, 10” and 12”
  • 25 Degree Inclined – 6”, 8”, 10” and 12” systems through 75’ diameter bins
Commercial Double Drive Vertical Unloader Hutchinson horizontal sweep Hutchinson 25 degree sweep
Commercial Double Drive
Vertical Unloader
Hutchinson horizontal sweep Hutchinson 25 degree sweep

 

Grain Transfer and Augers

DMC Trans-Fer® Grain Conveying Air Systems
These systems are perfect for new or existing grain drying and storage facilities. Grain is moved thru them with air flow. These systems are easy to install and add on to. DMC offers four systems:

  • 700 – 4” system capacity of up to 850 bph
  • 1200 – 5” system capacity of up to 1300 bph
  • 1700 – 5” system capacity of up to 1800 bph
  • 2100 – 6” system capacity of up to 2500 bph
DMC Trans-Fer Conveying Air Systems DMC Trans-Fer Conveying Air Systems DMC Trans-Fer Conveying Air Systems DMC Trans-Fer Conveying Air Systems

 

Meridian Augers

Conventional augers available in:
  • 7″ to 12″ in diameter
  • 32′ to 39′ in length
Swing away augers available in:
  • 10″ to 12″ in diameter
  • 59′ to 85′ 7″ in length

Farm King Backsaver AugerFarm King Back Saver Auger has self-leveling hopper on the swing away auger, this makes loading on uneven terrain possible. The scissor lift undercarriage requires less hydraulic pressure to raise or lower auger. The wide undercarriage makes transportation easy.

  • Model 12122 – size 12” x 122’, hopper dimensions 60” x 48”, tractor requirements 120hp/1500PSI
  • Model 14122 – size 14” x 122’, hopper dimensions 60” x 48”, tractor requirements 153hp/1500PSI

 

Farm King Conventional AugerFarm King Conventional Auger with the gear box on the right or left side of the drive makes this model easy to move deep under a bin. It is easy to transport with the trailing swivel wheels that can be raised hydraulically to allow increased turning ability.

  • Model 831 – width 8”, length 31’, and double belt drive
  • Model 836 – width 8”, length 36’, and double belt drive
  • Model 841 – width 8”, length 41’, and double belt drive
  • Model 846 – width 8”, length 46’, and double belt drive
  • Model 851 – width 8”, length 51’, and double belt drive
  • Model 856 – width 8”, length 56’, and triple belt drive
  • Model 861 – width 8”, length 61’, and triple belt drive
  • Model 1031 -width 10”, length 31’, and triple belt drive
  • Model 1036 – width 10”, length 36’, and triple belt drive
  • Model 1041- width 10”, length 41’, and triple belt drive
  • Model 1051 – width 10”, length 51’, and triple belt drive
  • Model 1061 – width 10”, length 61’
  • Model 1336 – width 10”, length 36’, and triple belt drive

Farm King Utility AugerFarm King Utility Auger has a wide variety of utility augers, with various tubing lengths to allow customers to choose exact sizing they need.  Spider cage are standard on all models to protect the intake flighting and belting.

Auger Sizes 4″ 6″ 8″
Auger Length 11′, 16′, 21′ 11′, 16′, 21′ 11′, 16′, 23′
Extension Lengths 10′ 10′ 5′ 10′
Power ½-1 hp 1-4 hp 3-10 hp
Auger Tubing 16 gauge 16 gauge 14 gauge
Flighting 12 gauge 12 gauge 10 gauge

 

Farm King Unloading AugerFarm King Unloading Augers are much faster at transferring grains and oilseeds and can reach where normal portable augers can’t fit.

  • Model 810h – 8” tube width, 9” tube length, weights 260lbs
  • Model 810e – 8” tube width, 9” tube length, weights 270lbs
  • Model 1010h – 10” tube width, 9” tube length, weights 310lbs
  • Model 1010e – 10” tube width, 9” tube length, weights 320lbs

Grain Cleaners and Vacs

Farm King Grain Cleaner – there are 2 different grain cleaners; they are designed to separate dockage from the grain. Dockage can take up storage space and increase shipping costs. Clean grain will dry faster too.

Farm King Grain Cleaner 360 Farm King Grain Cleaner 480
Model  360
drum dia 36”, length 97”,
capacity 1000bu/hr
Model 480
drum dia 48”, length 144”,
capacity 2500bu/hr

 

Farm King Grain vac is an easy way to transfer grain from bin to truck and much more. The versatility of grain vac hoses allows operator to get into hard to reach places for cleaning.

  • Model 6640 – 6” suction; optional self-contained hydraulics
  • Model 6644 – 6” suction; self-contained; tandem axle undercarriage; Cummins QSB 4.5L engine – 130 hp @ 1800 RPM

Farm King Grain Vac

Capacities:
Soybeans 2800-3600 bu/hr
Wheat 3000-3800 bu/hr
Canola 3000-3700 bu/hr
Barley/Corn 3200-4000 bu/hr